Reference Guide

152 | Interfaces
www.dell.com | support.dell.com
Related
Commands
show vlan
Displays the current VLAN configurations on the switch.
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 11-30. show vlan Command Example
vlan tagged Runs the TDR test.
brief (OPTIONAL) Enter the keyword brief to display the following information:
• VLAN ID
• VLAN name (left blank if none is configured.)
• Spanning Tree Group ID
• MAC address aging time
• IP address
id vlan-id (OPTIONAL) Enter the keyword id followed by a number from 1 to 4094. Only
information on the VLAN specified is displayed.
name
vlan-name
(OPTIONAL) Enter the keyword
name followed by the name configured for the VLAN.
Only information on the VLAN named is displayed.
Version 8.3.17.0 Supported on M I/O Aggregator
Table 11-10. show vlan Command Information
Column Heading Description
(Column 1 — no heading) asterisk symbol (*) = Default VLAN
G = GVRP VLAN
P = primary VLAN
C = community VLAN
I = isolated VLAN
NUM Displays existing VLAN IDs.
FTOS#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring VLANs, P -
Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged
NUM Status Description Q Ports
1 Inactive a
2 Inactive
* 20 Active U Te 0/3,5,13,53-56
1002 Active T Te 0/3,13,55-56
FTOS#