Reference Guide

150 | Interfaces
www.dell.com | support.dell.com
Example
Figure 11-27. show interfaces switchport Command Example
Related
Commands
show range
Displays all interfaces configured using the group command.
Syntax
show range
Command Mode
INTERFACE RANGE (config-if-range)
Command
History
Table 11-8. Items in show interfaces switchport Command Example
Items Description
Name Displays the interface’s type, slot and port number.
802.1QTagged Displays whether if the VLAN tagged (“True”), untagged (“False”), or hybrid
(“Hybrid”), which supports both untagged and tagged VLANs by port 13/0.
Vlan membership Lists the VLANs to which the interface is a member. Starting with FTOS 7.6.1,
this field can display native VLAN membership by port 13/0.
FTOS#show interfaces switchport
Codes: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Trunk, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT
tagged
Name: TenGigabitEthernet 1/1
802.1QTagged: Hybrid
IO-AGG port mode: Auto VLANs enabled
Vlan membership:
Q Vlans
U 1
T 2-4094
Native VlanId: 1.
Name: TenGigabitEthernet 1/2
802.1QTagged: Hybrid
IO-AGG port mode: Auto VLANs enabled
Vlan membership:
Q Vlans
U 1
T 2-4094
Native VlanId: 1.
--More--
show ip interface Displays Layer 3 information about the interfaces.
Version 8.3.17.0 Supported on M I/O Aggregator