Reference Guide

Interfaces | 147

Figure 11-24. show interfaces port-channel brief Command Example

Commands

Input 0 IP packets... Displays the number of packets with IP headers, VLAN tagged headers

and MPLS headers.

The number of packets may not add correctly because a VLAN tagged IP

packet counts as both a VLAN packet and an IP packet.

0 64-byte... Displays the size of packets and the number of those packets entering that

interface. This information is displayed over two lines.

Received 0... Displays the type and number of errors or other specific packets received.

This information is displayed over three lines.

FTOS#show int po 1 brief

Codes: L - LACP Port-channel

LAG Mode Status Uptime Ports

1 L3 down 00:00:00 Te 0/16 (Down)

FTOS#

show lacp Displays the LACP matrix.