Reference Guide

Interfaces | 145
Example
Figure 11-22. show interfaces description Command Example
show interfaces port-channel
Displays information on configured Port Channel groups.
Syntax
show interfaces port-channel [channel-number] [brief | description]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Table 11-5. show interfaces description Command Example Fields
Field Description
Interface Displays type of interface and associated slot and port number.
OK? Indicates if the hardware is functioning properly.
Status States whether the interface is enabled (up) or disabled (administratively down).
Protocol States whether IP is enabled (up) or disabled (down) on the interface.
Description Displays the description (if any) manually configured for the interface.
FTOS#show interface description
Interface OK Status Protocol Description
TenGigabitEthernet 0/1 NO admin down down
TenGigabitEthernet 0/2 NO admin down down
TenGigabitEthernet 0/3 NO admin down down
TenGigabitEthernet 0/4 NO admin down down
TenGigabitEthernet 0/5 NO admin down down
TenGigabitEthernet 0/6 NO admin down down
TenGigabitEthernet 0/7 NO up down
TenGigabitEthernet 0/8 YES up up
TenGigabitEthernet 0/9 NO admin down down
TenGigabitEthernet 0/10 NO admin down down
TenGigabitEthernet 0/11 NO admin down down
TenGigabitEthernet 0/12 NO admin down down
TenGigabitEthernet 0/13 NO admin down down
TenGigabitEthernet 0/14 NO admin down down
TenGigabitEthernet 0/15 NO admin down down
TenGigabitEthernet 0/16 YES up up
TenGigabitEthernet 0/17 NO admin down down
TenGigabitEthernet 0/18 NO admin down down
TenGigabitEthernet 0/19 NO admin down down
TenGigabitEthernet 0/20 NO admin down down
TenGigabitEthernet 0/21 NO admin down down
channel-number
For a Port Channel interface, enter the keyword port-channel followed by a
number:
Range: 1-128
brief (OPTIONAL) Enter the keyword brief to display only the port channel
number, the state of the port channel, and the number of interfaces in the port
channel.
description (OPTIONAL) Enter the keyword description to display interface
information with description.
Version 8.3.17.0 Supported on M I/O Aggregator