Reference Guide

Interfaces | 129
default vlan-id
Set the default VLAN-id.
Syntax
default vlan-id <vlan-id>
To set the default VLAN-id, use the no default vlan-id command.
Defaults
none
Command Modes
CONFIGURATION
Command
History
Related
Commands
description
Assign a descriptive text string to the interface.
Syntax
description desc_text
To delete a description, enter no description.
Parameters
Defaults
No description is defined.
Command Modes
INTERFACE
Command
History
Usage
Information
• Spaces between characters are not preserved after entering this command unless you enclose the
entire description in quotation marks (“desc_text”).
• Entering a text string after the default vlan-id command overwrites any previous text string
configured as the description.
• The show tdr and default vlan-id commands are the only commands that you can configure on an
interface that is a member of a port-channel.
• Use the show interfaces description command to display descriptions configured for each
interface.
Related
Commands
Version 8.3.17.0 Supported on M I/O Aggregator
show vlan Displays VLAN configuration.
desc_text
Enter a text string up to 240 characters long.
Version 8.3.17.0 Supported on M I/O Aggregator
show interfaces description
Displays the description field of interfaces.