Reference Guide

102 | Data Center Bridging
www.dell.com | support.dell.com
Example
Figure 7-9. show interfaces pfc statistics Command Example
show stack-unit stack-ports ets detail
Displays the ETS configuration applied to egress traffic on stacked ports, including ETS operational
mode on each unit and the configurated priority groups with dot1p priorities, bandwidth allocation, and
scheduler type.
Syntax
show stack-unit {all | stack-unit} stack-ports {all | port-number} ets detail
Parameters
Command Mode
EXEC Privilege
Command
History
FTOS#show interface tengigabitethernet 1/49 pfc statistics
Interface TenGigabitEthernet 1/49
Priority Received Pfc Frames Transmitted Pfc Frames
-------- ------------------- ----------------------
0 0 0
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
FTOS#
stack-unit
Enter the stack unit identification.
port-number
Enter the port number.
Version 8.3.17.0 Supported on M I/O Aggregator