Users Guide

Example
morpheus% ftp 10.31.1.111
Connected to 10.31.1.111.
220 FTOS (1.0) FTP server ready
Name (10.31.1.111:dch): dch
331 Password required
Password:
230 User logged in
ftp> pwd
257 Current directory is "flash:"
ftp> dir
200 Port set okay
150 Opening ASCII mode data connection
size date time name
-------- ------ ------ --------
512 Jul-20-2004 18:15:00 tgtimg
512 Jul-20-2004 18:15:00 diagnostic
512 Jul-20-2004 18:15:00 other
512 Jul-20-2004 18:15:00 tgt
226 Transfer complete
329 bytes received in 0.018 seconds (17.95 Kbytes/s)
ftp>
Related Commands
ftp-server topdir— sets the directory to be used for incoming FTP connections.
ftp-server username— sets a username and password for incoming FTP connections.
ftp-server topdir
Specify the top-level directory to be accessed when an incoming FTP connection request is made.
Syntax
ftp-server topdir directory
Parameters
directory Enter the directory path.
Defaults The internal ash is the default directory.
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information After you enable FTP server functions with the ftp-server enable command, Dell Networking recommends
specifying a top-level directory path. Without a top-level directory path specied, the Dell Networking OS directs
users to the ash directory when logging in to the FTP server.
Related Commands
ftp-server enable — enables FTP server functions on the M I/O Aggregator.
ftp-server username— sets a username and password for incoming FTP connections to the M I/O Aggregator.
52 Control and Monitoring