Users Guide

snmp context
Enables you to map a bgp vrf instance within a SNMP context through community mapping, in SNMPv2c and SNMPv3.
Syntax
[no] snmp context [context name]
Parameters
context name
Enter a unique name for the context.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.13(0.0) Introduced on all DNOS platforms.
Usage Information
This command is used for mapping SNMP context to a VRF instance within a community, in SNMPv2c and
SNMPv3. The no version of this command turns o this feature.
snmp-server community
Congure a new community string access for SNMP v3.
Syntax
snmp-server community community-name {ro | rw} [ipv6 ipv6-access-list-name
[ipv6 ipv6-access-list-name | access-list-name | security-name name] |
security-name name [ipv6 ipv6-access-list-name | access-list-name | security-
name name] | access-list-name [ipv6 ipv6-access-list-name | access-list-name |
security-name name]]]
To remove access to a community, use the no snmp-server community community-string {ro |
rw} [security-name name [access-list-name | ipv6 access-list-name | access-
list-name ipv6 access-list-name]] command.
Parameters
community-name Enter a text string (up to 20 characters long) to act as a password for SNMP.
ro Enter the keyword ro to specify read-only permission.
rw Enter the keyword rw to specify read-write permission.
ipv6 access-list-
name
(Optional) Enter the keyword ipv6 then an IPv6 ACL name (a string up to 16 characters
long).
security-name
name
(Optional) Enter the keywords security-name then the security name as dened by
the community MIB.
access-list-name (Optional) Enter a standard IPv4 access list name (a string up to 16 characters long).
Defaults none
Command Modes CONFIGURATION
Simple Network Management Protocol (SNMP) and Syslog 357