Manualshelf

Users Guide

ManualsBrandsDell ManualsComputer equipmentPowerEdge M IO Aggregator
31323334353637383940
Table Of Contents
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information You must include the colon (:) when entering this command.
CAUTION: This command deletes all les, including the startup conguration le. So, after executing this
command, consider saving the running cong as the startup cong (use the write memory command
or copy run start command).
Related Commands
copy – copies the current conguration to either the startup-conguration le or the terminal.
show le – displays the contents of a text le in the local lesystem.
show le-systems – displays information about the le systems on the system.
HTTP Copy via CLI
Copy one le to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip eld).
Syntax
copy http://10.16.206.77/sample_file flash://sample_filecopy flash://
sample_file http://10.16.206.77/sample_file
You can copy from the server to the switch and vice-versa.
Parameters
copy http:
flash:
Address or name of remote host []: 10.16.206.77
Port number of the server [80]:
Source le name []: sample_le
User name to login remote host: x
Password to login remote host:
Destination le name [sample_le]:
Defaults None.
Command Modes EXEC
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Introduced on the FN I/O Aggregator.
9.3(0.1) Introduced on the M I/O Aggregator.
34 File Management