Users Guide

c Enter a delineator character to specify the limits of the text banner. The delineator is a
percent character (%).
line Enter a text string for your text banner message ending the message with your delineator.
The delineator is a percent character (%). Range: maximum of 50 lines, up to 255
characters per line
Defaults No banner is congured and the CR is required when creating a banner.
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.3(0.0) Supported on the M I/O Aggregator.
Usage Information After entering the banner login command, type one or more spaces and a delineator character. Enter the banner
text then the second delineator character. When the user is connected to the router, if a message of the day
banner is congured, it displays rst. If no message of the day banner is congured, the login banner and prompt
appear. After the user has logged in, the EXEC banner (if congured) displays.
Example
Dell(conf)#banner login ?
keyboard-interactive Press enter key to get prompt
LINE c banner-text c, where 'c' is a delimiting character
Dell(conf)#no banner login ?
keyboard-interactive Prompt will be displayed by default
<cr>
Dell(conf)#banner login keyboard-interactive
Enter TEXT message. End with the character '%'.
This is the banner%
Dell(conf)#end
Dell#exit
13d21h9m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated for user on
line console
This is the banner
Dell con0 now available
Press RETURN to get started.
13d21h10m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user on line
console
This is the banner
Dell>
Related Commands
exec-banner— enables the display of a text string when you enter EXEC mode.
banner motd
Set a message of the day (MOTD) banner.
Syntax
banner motd c line c
Security 329