Users Guide

ManualsBrandsDell ManualsComputer equipmentPowerEdge M IO Aggregator

Admin mode is On

Admin is enabled, Priority list is 4-5

Local is enabled, Priority list is 4-5

Link Delay 45556 pause quantum

0 Pause Tx pkts, 0 Pause Rx pkts

Example of the show stack-unit all stack-ports all ets details Command

Dell# show stack-unit all stack-ports all ets details

Stack unit 0 stack port all

Max Supported TC Groups is 4

Number of Traffic Classes is 1

Admin mode is on

Admin Parameters:

--------------------

Admin is enabled

TC-grp Priority# Bandwidth TSA

------------------------------------------------

0 0,1,2,3,4,5,6,7 100% ETS

1 - -

2 - -

3 - -

4 - -

5 - -

6 - -

7 - -

8 - -

Stack unit 1 stack port all

Max Supported TC Groups is 4

Number of Traffic Classes is 1

Admin mode is on

Admin Parameters:

--------------------

Admin is enabled

TC-grp Priority# Bandwidth TSA

------------------------------------------------

0 0,1,2,3,4,5,6,7 100% ETS

1 - -

2 - -

3 - -

4 - -

5 - -

6 - -

7 - -

8 - -

Example of the show interface DCBx detail Command

Dell# show interface tengigabitethernet 0/4 dcbx detail

Dell#show interface te 0/4 dcbx detail

E-ETS Configuration TLV enabled e-ETS Configuration TLV disabled

R-ETS Recommendation TLV enabled r-ETS Recommendation TLV disabled

P-PFC Configuration TLV enabled p-PFC Configuration TLV disabled

F-Application priority for FCOE enabled f-Application Priority for FCOE

disabled

I-Application priority for iSCSI enabled i-Application Priority for iSCSI

disabled

--------------------------------------------------------------------------------

Data Center Bridging (DCB)