Users Guide

FC-MAP FCoE MAC-address prefix value - The unique 24-bit MAC address prefix
that identifies a fabric.
FKA-ADV-period Time interval (in seconds) used to transmit FIP keepalive
advertisements.
FCF Priority The priority used by a server to select an upstream FCoE forwarder.
Config-State Indicates whether the configured FCoE and FC parameters in the FCoE
map are valid: Active (all mandatory FCoE and FC parameters are
correctly configured) or Incomplete (either the FC-MAP value, fabric ID,
or VLAN ID are not correctly configured).
Oper-State Operational status of the link to the fabric: up (link is up and
transmitting FC traffic), down (link is down and not transmitting FC
traffic), link-wait (link is up and waiting for FLOGI to complete on peer
FC port), or removed (port has been shut down).
Members Aggregator with the FC ports, which are members of the dedicated
FCoE VLAN that carries storage traffic to the specified fabric.
show qos dcb-map Command Examples
Dell# show qos dcb-map dcbmap2
State :Complete
PfcMode:ON
--------------------
PG:0 TSA:ETS BW:50 PFC:OFF
Priorities:0 1 2 4 5 6 7
PG:1 TSA:ETS BW:50 PFC:ON
Priorities:3
Table 27. show qos dcb-map Field Descriptions
Field Description
State Complete: All mandatory DCB parameters are correctly configured. In
progress: The DCB map configuration is not complete. Some
mandatory parameters are not configured.
PFC Mode PFC configuration in the DCB map: On (enabled) or Off.
PG Priority group configured in the DCB map.
TSA Transmission scheduling algorithm used in the DCB map: Enhanced
Transmission Selection (ETS).
BW Percentage of bandwidth allocated to the priority group.
PFC PFC setting for the priority group: On (enabled) or Off.
318
NPIV Proxy Gateway