Users Guide

* first: Enter the keyword first to end daylight saving time in the first week of the month.
* last: Enter the keyword last to end daylight saving time in the last week of the month.
– end-month: Enter the name of one of the 12 months in English. You can enter the name of a day
to change the order of the display to time day month year.
– end-day: Enter the number of the day. The range is from 1 to 31. You can enter the name of a
month to change the order of the display to
time day month year.
– end-year: Enter a four-digit number as the year. The range is from 1993 to 2035.
– end-time: Enter the time in hours:minutes. For the hour variable, use the 24-hour format;
example, 17:15 is 5:15 pm.
– offset: (OPTIONAL) Enter the number of minutes to add during the summer-time period. The
range is from 1 to1440. The default is
60 minutes.
Example of the clock summer-time recurring Command
Dell(conf)#clock summer-time pacific recurring Mar 14 2012 00:00 Nov 7 2012
00:00
Dell(conf)#
NOTE: If you enter <CR> after entering the recurring command parameter, and you have already
set a one-time daylight saving time/date, the system uses that time and date as the recurring
setting.
Example of Clock Summer-Time Recurring Parameters
Dell(conf)#clock summer-time pacific recurring ?
<1-4> Week number to start
first Week number to start
last Week number to start
<cr>
Dell(conf)#clock summer-time pacific recurring
Dell(conf)#
252
System Time and Date