Users Guide

Dell(conf-if-po-21)#switchport
Dell(conf-if-po-21)#no shut
Dell(conf-if-po-21)#end
Dell#
5. Show the port channel status.
Dell#sh int port-channel br
Codes: L - LACP Port-channel
O - OpenFlow Controller Port-channel
LAG Mode Status Uptime Ports
L 20 L2 up 00:00:53 Fo 0/33 (Up)
Fo 0/37 (Up)
L 21 L2 up 00:00:02 Fo 0/49 (Up)
Dell#
Dell(conf)#int port-channel 20
Dell(conf-if-po-20)#vlan tagged 1000
Dell(conf-if-po-20)#
Dell(conf-if-po-21)#vlan tagged 1000
% Error: Same VLAN cannot be added to more than one uplink port/LAG.
Dell(conf-if-po-21)#vlan tagged 1001
Dell(conf-if-po-21)#
6. Show the VLAN status.
Dell#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port
Mirroring VLANs, P - Primary, C - Community, I - Isolated
O - Openflow
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
o - OpenFlow untagged, O - OpenFlow tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged,
V - VLT tagged
NUM Status Description Q Ports
* 1 Active U Po20(Fo 0/33,37)
U Po21(Fo 0/49)
1000 Active T Po20(Fo 0/33,37)
1001 Active T Po21(Fo 0/49)
Dell#
156
Link Aggregation