Owner`s manual

Data Center Bridging | 93
show dcb
Displays the data center bridging status, the number of PFC-enabled ports, and the number of
PFC-enabled queues.
Syntax
show dcb [stack-unit unit-number]
Parameters
Command Mode
EXEC PRIVILEGE
Command
History
Example
Figure 7-3. show dcb Command Example
Usage
Information
Specify a stack-unit number on the Master switch in a stack.
show interface dcbx detail
Displays the DCBX configuration on an interface.
Syntax
show interface port-type slot/port dcbx detail
Parameters
Command Mode
EXEC Privilege
Command
History
unit number Enter the DCB unit number.
The valid values are 0 to 5.
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS# show dcb
stack-unit 0 port-set 0
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
PFC Queue Count : 2 (current), 2 (configured)
port-type Enter the port type.
slot/port Enter the slot/port number.
Version 8.3.17.0 Supported on M I/O Aggregator