Owner`s manual

88 | Data Center Bridging

www.dell.com | support.dell.com

clear ets counters

Clear ETS TLV counters.

Syntax

clear ets counters [tengigabitethernet slot/port]

Parameters

Defaults

None

Command Modes

EXEC Privilege

Command

History

clear pfc counters

Clear PFC TLV counters.

Syntax

clear pfc counters [stack-unit unit-number | tengigabitethernet slot/port]

Parameters

Defaults

None

Command Modes

EXEC Privilege

Command

History

dcb enable

Re-enable DCB.

Syntax

dcb enable

To disable DCB, use the no dcb enable command.

Defaults

None

Command Modes

CONFIGURATION

Command

History

Usage

Information

The Aggregator is autoconfigured to use DCB. In some network topologies, you may want to disable

DCB and allow link-level flow control to control data transmission between the Aggregator and other

network devices.

slot/port Enter the slot/port number.

Version 8.3.17.0 Supported on M I/O Aggregator

unit number

<0-5>

Number of the member stack unit. Valid values: 0 to 5. Default: 0

slot/port Enter the slot/port number.

Version 8.3.17.0 Supported on M I/O Aggregator