Owner`s manual

Control and Monitoring | 51
Related
Commands
show debugging
Displays a list of all enabled debugging processes.
Syntax
show debugging
Command Mode
EXEC Privilege
Command
History
Example
Figure 5-8. show debugging Command Example
show diag
Displays the diagnostics information.
Syntax
show diag {information | stack-unit number [detail | summary]] | testcase}
Parameters
Defaults
Summary
Command Modes
EXEC Privilege
debug cpu-traffic-stats Enables CPU traffic statistics for debugging.
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS#show debug
Generic IP: (Access List: test)
IP packet debugging is on for (Access List: test)
TenGigabitEthernet 0/16
ICMP packet debugging is on for
TenGigabitEthernet 0/16
OSPF:1
OSPF packet debugging is on
DHCP:
DHCP debugging is on
FTOS#
information Enter the keyword information to view current diagnostics information
in the system.
stack-unit unit-id (OPTIONAL) Enter the keyword stack-unit followed by the unit-id to display
information on a specific stack member. Range: 0 to 5.
detail
(OPTIONAL) Enter the keyword detail to view detailed diagnostics
information.
summary
(OPTIONAL) Enter the keyword summary to view a summary of the
diagnostics information.
testcase
Enter the keyword testcase to view current diagnostics testcases available
in the system.