Owner`s manual

40 | Control and Monitoring
www.dell.com | support.dell.com
disable
Return to EXEC mode.
Syntax
disable [level]
Parameters
Defaults
1
Command Modes
EXEC Privilege
Command
History
enable
Enter the EXEC Privilege mode or any other privilege level configured. After entering this command,
you may need to enter a password.
Syntax
enable [level]
Parameters
Defaults
15
Command Modes
EXEC
Command
History
Usage
Information
Users entering EXEC Privilege mode or any other configured privilege level can access configuration
commands. To protect against unauthorized access, use the enable password command to configure a
password for the enable command at a specific privilege level. If no privilege level is specified, the
default is privilege level 15.
Related
Commands
end
Return to the EXEC Privilege mode from other command modes (for example, CONFIGURATION
mode).
Syntax
end
level
(OPTIONAL) Enter a number for a privilege level of the FTOS.
Range: 0 to 15.
Default: 1
Version 8.3.17.0 Supported on M I/O Aggregator
level
(OPTIONAL) Enter a number for a privilege level of FTOS.
Range: 0 to 15.
Default: 15
Version 8.3.17.0 Supported on M I/O Aggregator
enable password
Configures a password for the
enable command and to access a privilege level.