Owner`s manual

System Time | 229
Related
Commands
show clock
Displays the current clock settings.
Syntax
show clock [detail]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 23-3. show clock Command Example
Example
Figure 23-4. show clock detail Command Example
Related
Commands
clock read-calendar
Set the software clock on the switch from the information set in hardware clock (calendar).
Syntax
clock read-calendar
Defaults
Not configured.
Command Modes
EXEC Privilege
Command
History
Usage
Information
In the switch, the hardware clock is separate from the software and is called the calendar. This
hardware clock runs continuously. After the hardware clock (the calendar) is set, the FTOS
automatically updates the software clock after system bootup.
show clock Displays the time and date from the switch software clock.
detail (OPTIONAL) Enter the keyword detail to view the source information of the clock.
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS#show clock
12:30:04.402 pacific Tue May 22 2012
FTOS#
FTOS#show clock detail
12:30:26.892 pacific Tue May 22 2012
Time source is RTC hardware
Summer time starts 00:00:00 UTC Wed Mar 14 2012
Summer time ends 00:00:00 pacific Wed Nov 7 2012
FTOS#
clock summer-time recurring Displays the time and date from the switch hardware clock.
show calendar Displays the time and date from the switch hardware clock.
Version 8.3.17.0 Supported on M I/O Aggregator