Owner`s manual

208 | Simple Network Management Protocol (SNMP) and Syslog
www.dell.com | support.dell.com
• show logging
• snmp-server community
• terminal monitor
clear logging
Clear the messages in the logging buffer.
Syntax
clear logging
Defaults
none
Command Modes
EXEC Privilege
Command
History
Related
Commands
logging hostname
Configure an IP address or host name of a Syslog server where logging messages will be sent. Multiple
logging servers of IPv4 can be configured.
Syntax
logging {ipv4-address | hostname}
To disable logging, enter no logging.
Parameters
Defaults
Disabled
Command Modes
CONFIGURATION
Command
History
Related
Commands
Version 8.3.17.0 Supported on M I/O Aggregator
show logging Displays logging settings and system messages in the internal buffer.
ipv4-address
Enter an IPv4 address (A.B.C.D).
hostname
Enter the name of a host already configured and recognized by the switch.
Version 8.3.17.0 Supported on M I/O Aggregator
logging on Enables the logging asynchronously to logging buffer, console, Syslog server, and
terminal lines.
logging trap Enables logging to the Syslog server based on severity.