Owner`s manual

112 | FIP Snooping
www.dell.com | support.dell.com
Command
History
debug fip-snooping
Enable the debug FIP protocol specific messages.
Syntax
debug fip-snooping [all | acl | error | ifm | info | ipc | rx]
Parameters
Command Modes
EXEC Privilege
Command
History
show fip-snooping config
Displays the FIP snooping status and configured FC-MAP values.
Syntax
show fip-snooping config
Command Mode
• EXEC
• EXEC Privilege
Command
History
Example
Figure 9-1. show fip-snooping config Command Example
Version 8.3.17.0 Supported on M I/O Aggregator
all Enable all the debug options.
acl
Enable for ACL specific debugs
error
Enable for Error specific debugs
ifm
Enable for IFM specific debugs
info
Enable for Information specific debugs
ipc
Enable for IPC specific debugs
rx
Enable for packet receive specific debugs
Version 8.3.17.0 Supported on M I/O Aggregator
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS#show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
FTOS#