Deployment Guide

Version Description
8.3.17.0 Supported on the M I/O Aggregator.
terminal xml
Enable XML mode in Telnet and SSH client sessions.
Syntax
terminal xml
To exit the XML mode, use the no terminal monitor command.
Defaults Disabled
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information This command enables XML input mode where you can either cut and paste XML requests or enter the XML
requests line-by-line.
trace route
View the packet path to a specic device.
Syntax
traceroute {host | ip-address}
Parameters
host
Enter the name of device.
ip-address Enter the IP address of the device in dotted decimal format.
Defaults Timeout = 5 seconds; Probe count = 3; 30 hops max; 40 byte packet size; UDP port = 33434
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Control and Monitoring 83