Deployment Guide

Example (detail
Command)
Dell#show server-interfaces detail
---------------- show server ports detail ---------------------
TenGigabitEthernet 0/1 is up, line protocol is up
Hardware is DellEth, address is 00:1e:c9:de:03:79
Current address is 00:1e:c9:de:03:79
Server Port AdminState is N/A
Pluggable media not present
Interface index is 33886978
Internet address is not set
Mode of IPv4 Address Assignment : NONE
DHCP Client-ID :001ec9de0379
MTU 12000 bytes, IP MTU 11982 bytes
LineSpeed 10000 Mbit
Flowcontrol rx off tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 2d16h24m
Queueing strategy: fifo
Input Statistics:
10701 packets, 1123557 bytes
0 64-byte pkts, 10701 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
10701 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
442113 packets, 46047526 bytes, 0 underruns
870 64-byte pkts, 362829 over 64-byte pkts, 55411 over 127-byte pkts
--More--
show system
Displays the current status of all stack members or a specic stack member.
Syntax
show system [brief | stack-unit unit-id]
Parameters
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of system information.
stack unit unit–id (OPTIONAL) Enter the keywords stack unit then the stack member ID for
information on the stack member. The range is from 0 to 5.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.11(0.0) Included the support for Stomp B1 chipset on FN IOM.
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
74 Control and Monitoring