Deployment Guide

Control and Monitoring

This chapter describes control and monitoring for the I/O Aggregator.

asset-tag

Assign and store a unique asset-tag to the stack member.

Syntax

asset-tag stack-unit unit id Asset-tag ID

To remove the asset tag, use the no stack-unit unit-id Asset-tag ID command.

Parameters

stack-unit unit-id Enter the keywords stack-unit then the unit-id to assign a tag to the specic

member. The range is from 0 to 5.

Asset-tag ID Enter a unique asset-tag ID to assign to the stack member. This option accepts a

maximum of 10 characters, including all special characters except double quotes. To

include a space in the asset-tag, enter a space within double quotes.

Defaults No asset-tag is assigned.

Command Modes EXEC Privilege

Supported Modes All Modes

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

9.2(0.0) Introduced on the M I/O Aggregator.

Related Commands show system— Displays the current status of all stack members or a specic member.

clear alarms

Clear the alarms on the system.