Deployment Guide

cpu private-mgmt
statistics
Enter the keywords cpu private-mgmt statistics, to display the Management
plane input/output counter statistics of the Private Management interface.
drops interface
interface
Enter the keyword drops to display internal drops on the selected stack member.
stack-port 33–56 Enter the keywords stack-port and a stacking port number to select a stacking port
for which to display statistics. Identify the stack port number as you would to identify a
10G port that was in the same place in one of the rear modules.
NOTE: You can identify stack port numbers by physical inspection of the rear
modules. The numbering is the same as for the 10G ports. You can also
inspect the output of the show system stack-ports command.
unit 0–0 {counters |
details | port-stats
[detail] | register}
Enter the keyword unit then 0 for port-pipe 0, and then enter one of the following
keywords to troubleshoot errors on the selected port-pipe and to give status on why a
port is not coming up to register level: counters, details, port-stats
[detail]
, or register.
Defaults none
Command Modes
EXEC
EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.8(0.0) Replaced the keyword port with interface.
8.3.17.0 Supported on the M I/O Aggregator.
Example (show
hardware stack-unit
phy-rmware-
version Command)
Dell#show hardware stack-unit 1 phy-firmware-version
PortNumber Status Programmed Version SW Version
=======================================================================
41 Present 01.05 01.05
42 Present 01.05 01.05
43 Present 01.05 01.05
44 Present 01.05 01.05
45 Not Present N/A N/A
46 Not Present N/A N/A
47 Not Present N/A N/A
48 Not Present N/A N/A
49 Present 01.06 01.06
50 Present 01.06 01.06
51 Present 01.06 01.06
52 Present 01.06 01.06
53 Present 01.06 01.06
54 Present 01.06 01.06
55 Present 01.06 01.06
56 Present 01.06 01.06
Dell#
In the above example, the Status eld represents presence of OPTM ports, Programmed version eld represents
loaded rmware version, and SW version represents the SDK version.
Example (data-
plane)
Dell#show hardware stack-unit 1 cpu data-plane statistics
bc pci driver statistics for device:
rxHandle :7392
noMhdr :0
noMbuf :0
noClus :0
436 Debugging and Diagnostics