Deployment Guide

CPLD IMAGE INFORMATION :
--------------------------------------------------------------
Card CPLD Name Version
Stack-unit 1 IOM SYSTEM CPLD 6
Dell#
show running-cong
Displays the current conguration and display changes from the default values.
Syntax
show running-config [entity] [configured] [status]
Parameters
entity (OPTIONAL) To display that entity’s current (non-default) conguration, enter one of the
following keywords:
NOTE: If you did not congure anything for that entity, nothing displays and
the prompt returns.
boot
for the current boot conguration
ftp
for the current FTP conguration
igmp
for the current IGMP conguration
interface
for the current interface conguration
line
for the current line conguration
lldp
for the current lldp conguration
logging
for the current logging conguration
management-
route
for the current Management port forwarding conguration
monitor
for the current Monitor conguration
snmp
for the current SNMP conguration
uplink-state-
group
for the uplink state group conguration
users
for the current users conguration
congured (OPTIONAL) Enter the keyword configured to display line card interfaces with non-
default congurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for the running
conguration and the start-up conguration.
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O aggregator.
File Management 41