Deployment Guide

enable
Enable communication with the SupportAssist server.
Syntax
enable
To disable communication to a specic SupportAssist server, use the no enable command.
Defaults Enabled
Command Modes SUPPORTASSIST SERVER
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Related Commands
• server — congure the name of the remote SupportAssist server.
url
Congure the URL to reach the SupportAssist remote server.
Syntax
url uniform-resource-locator
To delete the URL for the server, use the no url command.
Parameters
uniform-resource-
locator
Enter a text string for the URL using one of the following formats:
• http://[username:password@]<hostip>:<portNum>/<lepath>
• https://[username:password@]<hostip>:<portNum>/<lepath>
NOTE: The host IP for the server may be specied as an IPv4 address,
an IPv6 address or as a DNS hostname. If using the DNS hostname,
the DNS resolver will need to be congured and enabled.
Command Modes SUPPORTASSIST SERVER
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
SupportAssist 397