Deployment Guide

Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Related Commands
• email-address — congure email addresses to reach the contact person.
• phone — congure phone numbers to reach the contact person.
time-zone
Congure the time zone for contacting the person.
Syntax
time-zone zone +-HH:MM[start-time HH:MM] [end-time HH:MM]
To remove the time zone, use the no time-zone [zone | start-time | end-time] command.
Parameters
zone +-HH:MM Enter the keyword zone then a time dierence from GMT expressed as HH:MM. This
number may be preceded by either a + or – sign.
start-time HH:MM Enter the keywords start-time then a starting time expressed as HH:MM. Use the
24-hour clock format.
stop-time HH:MM Enter the keywords stop-time then a stopping time expressed as HH:MM. Use the 24-
hour clock format.
Command Modes SUPPORTASSIST PERSON
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information This command is optional for SupportAssist service conguration.
SupportAssist Server Commands
Dell EMC Networking OS supports the following SupportAssist Server mode commands.
SupportAssist
395