Deployment Guide
To disable a particular SupportAssist activity, use the no enable command.
Defaults Enabled
Command Modes
SUPPORTASSIST ACTIVITY FULL-TRANSFER
SUPPORTASSIST ACTIVITY CORE-TRANSFER
SUPPORTASSIST ACTIVITY EVENT-TRANSFER
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information Enter the specic SupportAssist activity mode and then enable it.
NOTE: By default, the full transfer includes the core les. When you disable the core transfer activity,
the full transfer excludes the core les.
Related Commands
• activity — move user to the SupportAssist Activity mode for that activity.
SupportAssist Company Commands
Dell EMC Networking OS supports the following SupportAssist Company mode commands.
address
Congure the address information for the company.
Syntax
address [city company-city] [{province | region | state} name] [country
company-country] [{postalcode | zipcode] company-code]
To remove a portion of the company address information, use the no address [city | province |
region | state | country | postalcode | zipcode] command. For example, to remove the city
alone, use the
no address city command.
To remove the complete company contact information, use the no address command.
Parameters
city company-city (OPTIONAL) Enter the keyword city then the city or town for the company site. To
include a space, enter a space within double quotes.
390 SupportAssist