Deployment Guide

ManualsBrandsDell ManualsComputer equipmentPowerEdge M IO Aggregator

371

372

373

374

375

376

377

378

379

380

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Supported on the FN IOM, FN I/O Aggregator, and M I/O Aggregator

Usage Information

NOTE: PFC/LLFC storm control enabled interfaces disable the interfaces if it receives continuous PFC/

LLFC packets. It can be a result of a faulty NIC/Switch that sends spurious PFC/LLFC packets.

storm-control multicast (Interface)

Congure the percentage of multicast trac allowed on the interface.

Syntax

storm-control multicast packets_per_second in

To disable multicast storm control on the interface, use the no storm-control multicast

packets_per_second in command.

Parameters

packets_per_secon

Enter the packets per second of broadcast trac allowed into the network. The range is

from 0 to 33554368.

Command Modes INTERFACE (conf-if-interface-slot/port)

Supported Modes Programmable-Mux (PMUX)

Command History

Version Description

9.4(0.0) Supported on the FN I/O Aggregator.

9.2(0.0) Supported on the M I/O Aggregator.

storm-control broadcast (Interface)

Congure the percentage of broadcast trac allowed on an interface.

Syntax

storm-control broadcast [packets_per_second in]

To disable broadcast storm control on the interface, use the no storm-control broadcast

[packets_per_second in] command.