Deployment Guide

Command Modes
• EXEC
• EXEC Privilege
Supported Modes Programmable-Mux (PMUX)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0)
Introduced on the M I/O Aggregator.
Example
Dell#show snmp user
User name: test
Engine ID: 0000178B0200000102030407
storage-type: nonvolatile active
Authentication Protocol: None
Privacy Protocol: None
User name: v1v2cwriteu
Engine ID: 0000178B0200000102030407
storage-type: nonvolatile active
Authentication Protocol: None
Privacy Protocol: None
Dell#
snmp context
Enables you to map a bgp vrf instance within a SNMP context through community mapping, in SNMPv2c and SNMPv3.
Syntax
[no] snmp context [context name]
Parameters
context name
Enter a unique name for the context.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.13(0.0) Introduced on all DNOS platforms.
Usage Information
This command is used for mapping SNMP context to a VRF instance within a community, in SNMPv2c and
SNMPv3. The no version of this command turns o this feature.
354 Simple Network Management Protocol (SNMP) and Syslog