Deployment Guide

Command History
Version Description
9.7(0.0) Introduced on the M I/O Aggregator. Added support for tunnel interface.
Usage Information Use this command to create an object that tracks the routing state of an IPv4 Layer 2 interface:
• The status of the IPv4 interface is UP only if the Layer 2 status of the interface is UP and the interface has a
valid IP address.
• The Layer 3 status of an IPv4 interface goes DOWN when its Layer 2 status goes down (for a Layer 3 VLAN,
all VLAN ports must be down) or the IP address is removed from the routing table.
track interface line-protocol
Congure object tracking on the line-protocol state of a Layer 2 interface.
Syntax
track object-id interface interface line-protocol
To return to the default setting, use the no track object-id command.
Parameters
object-id Enter the ID number of the tracked object. The range is 1 to 500.
interface Enter one of the following values:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
•
For a Loopback interface, enter the keyword loopback then a number from 0 to
16383.
• For a port channel interface, enter the keywords port-channel then a number.
• For a tunnel interface, enter the keyword tunnel.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.7(0.0) Introduced on the M I/O Aggregator.
Usage Information
Use this command to create an object that tracks the line-protocol state of a Layer 2 interface by monitoring its
operational status (UP or DOWN).
When the link-level status goes down, the tracked object status is considered to be DOWN; if the link-level status
is up, the tracked object status is considered to be UP.
Related Commands
• show track – displays information about tracked objects, including conguration, current state, and clients
which track the object.
• track interface ip routing – congures object tracking on the routing status of an IPv4 Layer 3 interface.
Object Tracking 293