Deployment Guide

Column Heading Description
• gi — Gigabit Ethernet then a slot/port
• po — Port Channel then a number. The range is from 1 to 255. \
• so — SONET then a slot/port.
• te — 10–Gigabit Ethernet then a slot/port.
State Lists if the MAC address is in use (Active) or not in use (Inactive).
The following describes the show mac-address-table count command shown in the following example.
Line Beginning
With
Description
MAC Entries... Displays the number of MAC entries learned per VLAN.
Dynamic Address... Lists the number of dynamically learned MAC addresses.
Static Address... Lists the number of user-dened MAC addresses.
Total MAC... Lists the total number of MAC addresses the switch uses.
Example (Count)
Dell#show mac-address-table count
MAC Entries for all vlans :
Dynamic Address Count : 5
Static Address (User-defined) Count : 0
Total MAC Addresses in Use: 5
Dell#
278 Layer 2