Deployment Guide

Field Description
Line Protocol Indicates whether the interface is administratively up
or down
Utilization (In Percent) Trac usage in percentage of the packets processed
by the particular member interface
Example
Dell#show link-bundle-distribution port-channel
Link-bundle trigger threshold - 60
LAG bundle - 1 Utilization[In Percent] - 0 Alarm State - Inactive
Interface Line Protocol Utilization[In Percent]
Te 0/5 Up 0
Te 0/13 Up 0
show port-channel-ow
Display an egress port in a given port-channel ow.
Syntax
show port-channel-flow port-channel number incoming-interface interface { src-
mac address dest-mac address {vlan vlanid | ether-type }} [ src-ip address
dest-ip address ] [ src-port number dest-port number ]
Parameters
port-channel
number
Enter the keywords port-channel then the number of the port channel to display ow
information. The range is from 1 to 128.
incoming-interface
interface
Enter the keywords incoming-interface then the interface type and slot/port or
number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
src-mac address Enter the keywords src-mac then the MAC source address in the nn:nn:nn:nn:nn:nn
format.
dest-macaddress Enter the keywords dest-mac then the MAC destination address in the
nn:nn:nn:nn:nn:nn format.
vlan vlan-id Enter the keyword vlan then the VLAN ID. The range is from 1 to 4094.
ether-type Enter the keywords ether-type then the ether-value in the XX:XX format.
src-ip address Enter the keywords src-ip then the IP source address in IP address format.
dest-ip address Enter the keywords dest-ip then the IP destination address in IP address format.
src-port number Enter the keywords src-port then the source port number. The range is from 1 to
65536. The default is None.
dest-port number Enter the keywords dest-port then the destination port number. The range is from 1 to
65536. The default is None.
Command Modes EXEC
Supported Modes All Modes
270 Link Aggregation Control Protocol (LACP)