Deployment Guide

Version Description
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
Dell#
show p-snooping enode
Displays information on the ENodes in FIP-snooped sessions, including the ENode interface and MAC address, FCF MAC address, VLAN ID,
and FC-ID.
Syntax
show fip-snooping enode [enode-mac-address]
Parameters
enode-mac-
address
Enter the MAC address of the ENodes to be displayed.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
The following table describes the show fip-snooping enode command.
Field Description
ENode MAC MAC address of the ENode
ENode Interface Slot/ port number of the interface connected to the ENode.
FCF MAC MAC address of the FCF
VLAN VLAN ID number used by the session
FC-ID Fibre Channel session ID assigned by the FCF.
Example
Dell# show fip-snooping enode
Enode MAC Enode Interface FCF MAC
VLAN FC-ID
--------- --------------- -------
---- ------ d4:ae:52:1b:e3:cd Te 0/11
54:7f:ee:37:34:40 100 62:00:11
174 FIP Snooping