Deployment Guide
Version Description
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
p-snooping port-mode fcf
Congure the port for bridge-to-FCF links.
Syntax
fip-snooping port-mode fcf
To disable the bridge-to-FCF link on a port, use the no fip-snooping port-mode fcf command.
Command Modes INTERFACE
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is four.
show p-snooping statistics
Displays statistics on the FIP packets snooped on all interfaces, including VLANs, physical ports, and port channels..
Syntax
show fip-snooping statistics [interface vlan vlan-id | interface port-type
port/slot | interface port-channel port-channel-number]
Parameters
vlan-id Enter the VLAN ID of the FIP packet statistics to be displayed.
port-type port/slot Enter the port-type and slot number of the FIP packet statistics to be displayed.
port-channel-
number
Enter the port channel number of the FIP packet statistics to be displayed.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
170 FIP Snooping