Deployment Guide

p-snooping enable

Enable FIP snooping on all VLANs or on a specied VLAN.

Syntax

fip-snooping enable

To disable the FIP snooping feature on all or a specied VLAN, use the no fip-snooping enable command.

Defaults FIP snooping is disabled on all VLANs.

Command Modes

• CONFIGURATION

• VLAN INTERFACE

Supported Modes Programmable-Mux (PMUX)

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

9.2(0.0) Introduced on the M I/O Aggregator.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is four. The maximum number of FIP

snooping sessions supported per ENode server is 16.

p-snooping fc-map

Congure the FC-MAP value FIP snooping uses on all VLANs.

Syntax

fip-snooping fc-map fc-map-value

To return the congured FM-MAP value to the default value, use the no fip-snooping fc-map command.

Parameters

fc-map-value Enter the FC-MAP value FIP snooping uses. The range is from 0EFC00 to 0EFCFF.

Defaults 0x0EFC00