Deployment Guide

Dynamic Host Conguration Protocol
Dynamic host conguration protocol (DHCP) is an application layer protocol that dynamically assigns IP addresses and other conguration
parameters to network end-stations (hosts) based on conguration policies determined by network administrators.
An Aggregator can operate as a DHCP client. As a DHCP client, the Aggregator requests an IP address from a DHCP server.
The following types of DHCP commands are described in this chapter:
• DHCP Client Commands
• Other Commands supported by DHCP Client
DHCP Client Commands
• clear ip dhcp client statistics
• ip address dhcp
• release dhcp interface
• renew dhcp interface
• show ip dhcp client statistics
• show ip dhcp lease
Other Commands supported by DHCP Client
• debug ip dhcp client events
• debug ip dhcp client packets
Topics:
• clear ip dhcp client statistics
• debug ip dhcp client events
• debug ip dhcp client packets
• ip address dhcp
• release dhcp interface
• renew dhcp interface
• show ip dhcp client statistics
• show ip dhcp lease
clear ip dhcp client statistics
Displays DHCP client statistics, including the number of DHCP messages sent and received on an interface.
Syntax
clear ip dhcp client statistics interface type slot/port
Parameters
interface type slot/
port
Clear DHCP client statistics on the specied interface.
9
136 Dynamic Host Conguration Protocol