Concept Guide

terminal Set terminal line parameters
traceroute Trace route to destination
Dell#confi
Dell(conf)#?
end Exit from Configuration mode
Specifying LINE Mode Password and Privilege
You can specify a password authentication of all users on dierent terminal lines.
The user’s privilege level is the same as the privilege level assigned to the terminal line, unless a more specic privilege level is assigned to
the user.
To specify a password for the terminal line, use the following commands.
• Congure a custom privilege level for the terminal lines.
LINE mode
privilege level level
• level level: The range is from 0 to 15. Levels 0, 1, and 15 are pre-congured. Levels 2 to 14 are available for custom
conguration.
• Specify either a plain text or encrypted password.
LINE mode
password [encryption-type] password
Congure the following optional and required parameters:
• encryption-type: Enter 0 for plain text or 7 for encrypted text.
• password: Enter a text string up to 25 characters long.
To view the password congured for a terminal, use the show config command in LINE mode.
Enabling and Disabling Privilege Levels
To enable and disable privilege levels, use the following commands.
• Set a user’s security level.
EXEC Privilege mode
enable or enable privilege-level
If you do not enter a privilege level, the system sets it to 15 by default.
• Move to a lower privilege level.
EXEC Privilege mode
disable level-number
• level-number: The level-number you wish to set.
If you enter disable without a level-number, your security level is 1.
RADIUS
Remote authentication dial-in user service (RADIUS) is a distributed client/server protocol.
This protocol transmits authentication, authorization, and conguration information between a central RADIUS server and a RADIUS client
(the Dell Networking system). The system sends user information to the RADIUS server and requests authentication of the user and
password. The RADIUS server returns one of the following responses:
Security
191