Administrator Guide
LACP Example
The below illustration shows how the LACP operates in an Aggregator stack by auto-conguring the uplink LAG 128 for the
connection to a top of rack (ToR) switch and a server-facing LAG for the connection to an installed server that you congured for
LACP-based NIC teaming.
Figure 17. LACP Operation on an Aggregator
Link Aggregation Control Protocol (LACP)
The commands for Dell Networks’s implementation of the link aggregation control protocol (LACP) for creating dynamic link
aggregation groups (LAGs) — known as port-channels in the Dell Networking OS — are provided in the following sections.
NOTE: For static LAG commands, refer to the Interfaces chapter), based on the standards specied in the IEEE 802.3
Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specications.
112
Link Aggregation