Reference Guide

Related
Commands
clear command history — clears the command history log.
show configuration lock
Display the configuration lock status.
Syntax
show configuration lock
Defaults None
Command
Modes
EXEC Privilege
Supported
Modes
All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
The type may be auto, manual, or rollback. When set to auto, Dell Networking OS
automatically denies access to CONFIGURATION mode to all other users every
time the user on the listed VTY line enters CONFIGURATION mode. When set to
manual, the user on the listed VTY line must explicitly set the lock each time before
entering CONFIGURATION mode. Rollback indicates that Dell Networking OS is in
a rollback process. The line number shown in the output can be used to send the
messages to that session or release a lock on a VTY line.
Example
Dell#show configuration lock
Configure exclusively locked by the following line:
Line : vty 0
Line number : 2
User : admin
Type : AUTO
State : LOCKED
Ip address : 10.11.9.97
Dell#
show cpu-traffic-stats
Display the CPU traffic statistics.
Syntax
show cpu-traffic-stats [port number | all]
Parameters
port number (OPTIONAL) Enter the port number to display traffic statistics
on that port only. The range is from 1 to 1568.
64