Reference Guide

enable

Enter EXEC Privilege mode or any other privilege level configured. After entering this command, you may

need to enter a password.

Syntax

enable [level]

Parameters

level (OPTIONAL) Enter a number for a privilege level of the Dell

Networking OS. The range is from 0 to 15. The default is 15.

Defaults 15

Command

Modes

EXEC

Supported

Modes

All Modes

Command

History

Version Description

9.4(0.0) Supported on the FN I/O Aggregator.

8.3.17.0 Supported on the M I/O Aggregator.

Usage

Information

Users entering EXEC Privilege mode or any other configured privilege level can

access configuration commands. To protect against unauthorized access, use the

enable password command to configure a password for the enable command

at a specific privilege level. If no privilege level is specified, the default is privilege

level 15.

Commands

enable password— configures a password for the enable command and to access

a privilege level.

end

Return to EXEC Privilege mode from other command modes (for example, CONFIGURATION mode).

Syntax

end

Command

Modes

• CONFIGURATION

• LINE

• INTERFACE

• MONITOR SESSION

• PROTOCOL LLDP

Supported

Modes

All Modes