Reference Guide

logging
for the current logging configuration
management-
route
for the current Management port
forwarding configuration
monitor
for the current Monitor configuration
snmp
for the current SNMP configuration
uplink-
state-group
for the uplink state group
configuration
users
for the current users configuration
configured (OPTIONAL) Enter the keyword configured to display line
card interfaces with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the
checksum for the running configuration and the start-up
configuration.
Command
Modes
EXEC Privilege
Supported
Modes
All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show running-config
Current Configuration ...
! Version 9-4(0-180)
!
boot system stack-unit 0 primary tftp://10.11.8.12/dv-ci-stomp-
tc-1-a1
!
redundancy auto-synchronize full
!
hostname Dell
...
Example
Dell#show running-config status
running-config bytes 5063, checksum 0xF6F801AC
startup-config bytes 4835, checksum 0x764D3787
Dell#
Usage
Information
The status option allows you to display the size and checksum of the running
configuration and the startup configuration.
44