Reference Guide

Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
In the switch, the hardware clock is separate from the software and is called the
calendar. This hardware clock runs continuously. After the hardware clock (the
calendar) is set, the operating system automatically updates the software clock
after system bootup.
You cannot delete this command (there is not a no version of this command).
clock set
Set the software clock in the switch.
Syntax
clock set time month day year
Parameters
time Enter the time in hours:minutes:seconds. For the hour
variable, use the 24-hour format; example, 17:15:00 is 5:15
pm.
month Enter the name of one of the 12 months, in English. You can
enter the number of a day and change the order of the
display to time day month year .
day Enter the number of the day. The range is from 1 to 31. You
can enter the name of a month to change the order of the
display to time month day year .
year Enter a four-digit number as the year. The range is from 1993
to 2035.
Defaults Not configured.
Command
Modes
EXEC Privilege
Supported
Modes
All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
You can change the order of the month and day parameters to enter the time and
date as
time day month year . You cannot delete the software clock.
367