Reference Guide

Command
Modes
EXEC Privilege
Supported
Modes
All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
You can change the order of the month and day parameters to enter the time and
date as time day month year.
In the switch, the hardware clock is separate from the software and is called the
calendar. This hardware clock runs continuously. After the hardware clock (the
calendar) is set, the operating system automatically updates the software clock
after system bootup. You cannot delete the hardware clock (calendar).
To manually update the software with the hardware clock, use the clock read-
calendar command.
Example
Dell#calendar set 08:55:00 june 18 2006
Dell#
Related
Commands
clock read-calendar— sets the software clock based on the hardware clock.
clock set— sets the software clock.
clock update-calendar— sets the hardware clock based on the software clock.
show clock— displays the clock settings.
clock read-calendar
Set the software clock on the switch from the information set in hardware clock (calendar).
Syntax
clock read-calendar
Defaults Not configured.
Command
Modes
EXEC Privilege
Supported
Modes
All Modes
366