Reference Guide

Parameters
interface Enter the following keywords and slot/port or number
information:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Defaults Not configured.
Command
Modes
CONFIGURATION
Supported
Modes
All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
login authentication
To designate the terminal lines, apply an authentication method list.
Syntax
login authentication {method-list-name | default}
To use the local user/password database for login authentication, use the no
login authentication
command.
Parameters
method-list-
name
Enter the keywords method-list-name to specify that
method list, created in the
aaa authentication login
command, to be applied to the designated terminal line.
default Enter the keyword default to specify that the default
method list, created in the aaa authentication login
command, is applied to the terminal line.
Defaults No authentication is performed on the console lines. Local authentication is
performed on the virtual terminal and auxiliary lines.
Command
Modes
LINE
Supported
Modes
All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
334