Reference Guide

-------------
10.10.10.10 0 0 1 1 0 00:00:00:00:00:00
3f01 CP
Dell#
show ip route
View information, including how they were learned, about the IP routes on the switch.
Syntax
show ip route [hostname | ip-address [mask] [longer-prefixes] |
list prefix-list [process-id] | connected | static | summary]
Parameters
ip-address (OPTIONAL) Specify a name of a device or the IP address of
the device to view more detailed information about the
route.
mask (OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view
all routes with a common prefix.
list prefix-list (OPTIONAL) Enter the keyword list and the name of a
configured prefix list.
process-id (OPTIONAL) Specify that only OSPF routes with a certain
process ID must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the
directly connected routes.
static (OPTIONAL) Enter the keyword static to view only routes
configured by the
ip route command.
summary (OPTIONAL) Enter the keyword summary.
Command
Modes
• EXEC
• EXEC Privilege
Supported
Modes
All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
The following describes the show ip route all command in the following
example.
236