Reference Guide

00:60:CF:20:7B:8C to 113.3.3.254
FTOS#
debug ip icmp
View information on the internal control message protocol (ICMP).
Syntax
debug ip icmp [interface] [count value]
To disable debugging, use the no debug ip icmp command.
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or
number information:
• For the management interface, enter the keyword
ManagementEthernet then the slot/port information.
The slot range is 0 and the port range is 0.
• For a 10 Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For VLAN, enter the keyword vlan then by a number
from 1 to 4094.
count value (OPTIONAL) Enter the keywords count then the count value.
The ranges from 1 to 65534. The default is Infinity.
Command
Modes
EXEC Privilege
Supported
Modes
All Modes
Command
History
Version
Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
To stop packets from flooding the user terminal when debugging is turned on, use
the count option.
Example
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40:
227