Reference Guide

show config (from INTERFACE RANGE mode)
Display the bulk configured interfaces (group).
Syntax
show config
Command
Modes
CONFIGURATION INTERFACE (conf-if-range)
Supported
Modes
All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell(conf)#interface range tengigabitethernet 0/1 - 2
Dell(conf-if-range-te-0/1-2)#show config
!
interface TenGigabitEthernet 0/1
no ip address
switchport
no shutdown
!
interface TenGigabitEthernet 0/2
no ip address
switchport
no shutdown
Dell(conf-if-range-te-0/1-2)#
show config (from INTERFACE VLAN mode)
Displays the current configuration of the Default VLAN.
Syntax
show config
Command
Modes
INTERFACE VLAN
Supported
Modes
All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell(conf-if-vl-1)#show config
!
interface Vlan 1
description a
no ip address
202