Reference Guide

[no] iscsi profile-compellent.
The default is: Compellent disk arrays are not detected.
NOTE: All these congurations are available only in PMUX mode.
Displaying iSCSI Optimization Information
To display information on iSCSI optimization, use the show commands detailed in the below table:
Table 7. Displaying iSCSI Optimization Information
Command Output
show iscsi Displays the currently congured iSCSI settings.
show iscsi sessions Displays information on active iSCSI sessions on the switch that have
been established since the last reload.
show iscsi sessions detailed [session isid] Displays detailed information on active iSCSI sessions on the switch.
To display detailed information on specied iSCSi session, enter the
session’s iSCSi ID.
show run iscsi Displays all globally-congured non-default iSCSI settings in the
current Dell Networking OS session.
show iscsi Command Example
Dell# show iscsi
iSCSI is enabled
iSCSI session monitoring is enabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
show iscsi sessions Command Example
Dell# show iscsi sessions
Session 0:
-----------------------------------------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
-----------------------------------------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0f60c2002-0360018428d48c94-iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.
show iscsi sessions detailed Command Example
Dell# show iscsi sessions detailed
Session 0 :
-----------------------------------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-2c
Up Time:00:00:01:28(DD:HH:MM:SS)
106
iSCSI Optimization